- SMS alarm (optional)

- Gauges with negative pressure up to 0.5 display can be configured, overcurrent, short circuit protection system.

- Standard with optimized function to prevent dry burning, overtemperature protection system, overpressure protection safety valve.

- Open cover to stop heating function

- Real-time data saving function, memory storage 20 programs, programmable sterilization programs of various modes

- After the completion of sterilization, the exhaust valve can be discharged according to the set ten-stage exhaust speed, and the exhaust speed can be manually adjusted at any time during the exhaust process.

--Freertos embedded operating system

- Standard USB flash drive real-time data recording function

- Automatic fault monitoring, alarm and recording function (optional printer required), anti-burn safety protection.

- With automatic detection, check and compare the functional relationship between temperature and pressure to ensure that the true saturated steam state is achieved

- Automatic detection of cold air discharge to ensure steam internal discharge function, to ensure a pollution-free environment

- Boiling point temperature can be set according to altitude

- The exhaust temperature can be adjusted within the boiling point temperature plus 0~25 degrees

- Dual temperature sensors that can detect air and water temperature

- One item sensor hole in the lid and two verification holes in the tank body are reserved for easy verification of the connection

- Self-sensing pressure interlocking device closed cover inspection system, leakage protection device

4. Large diameter, large capacity, sterilizer

Product characteristics

Liner diameter 370/400(110 L)

Volume 50L / 65L/85L/110L

Internal discharge (optional model) : After cooling, the steam is discharged through a professional condenser to achieve real internal discharge and eliminate environmental pollution

Drying function (optional model) : After the sterilization of internal pressure drainage, through the external cavity heating mode for temperature drying

Cooling fan: automatic start at the end of sterilization, optimized design of three-dimensional condensing fan to blow the whole inner tank, shorten the cooling time

Display temperature accuracy: 0.1 degrees

Sterilization stage graphic display, easy to view the sterilization process

Inner liner polishing: Inner liner polishing, reduce bacterial adhesion area, prevent dirt residue, easy to clean and maintain users

Dry burning protection: Standard dual electrode low water level sensor and heating rate software program, double overtemperature protection, effectively prevent dry burning

Optional high efficiency filter: Equipped with 0.2um HEPA college filter, with bacteria filtration function, truly achieve zero pollution

Many advantages Sterilization is safer and more thorough

The take-off pressure of the safety valve is 0.28Mpa

The maximum design pressure of sterilization pot is 0.3Mpa

Pressure interlocking mechanism

- Boot, sterilization start, the sterilization process of the micro position switch real-time monitoring of the location of the chain mechanism, once there is an abnormal alarm to stop to ensure safety.

- Sterilization process As long as the open lid knob is rotated, the sterilization pot automatically alarms and stops

- If the lid is not covered, the sterilizer automatically alarms and stops as long as the lid girder is moved during the sterilization process

- Specially designed girder locking mechanism, sterilization process ensures that the lid cannot be opened, more safe and reliable

After sterilization, the temperature in the cavity is lower than 95℃, and the opening temperature can be arbitrarily set.

- Double overpressure protection

- Double overtemperature protection

- Double limit protection

- Prevent dry burning

- Pressure sensor

- Leakage protector

- Automatic intelligent control system

Liner diameter 370/400(110 L)

Volume 50L / 65L/85L/110L